SBA’s Proposed Size-Standard Changes: What Small Businesses Should Do Before September 21

Written by

in

In military planning, the commander who understands the terrain has an advantage before the first movement begins. The same principle applies to federal contracting. Before you pursue a government opportunity, you must understand the classification rules, eligibility thresholds, competitive environment, and resources available to your company.

On August 20, 2026, the U.S. Small Business Administration issued two significant proposed rules that could change how thousands of businesses are classified for federal contracting and SBA-related programs. The proposals would revise industry size standards and replace the methodology SBA uses to establish those standards.

The potential impact is substantial. SBA estimates that approximately 114,000 additional firms could qualify as small under the proposed framework. However, these are proposed rules: not final rules. The outcome is not guaranteed, and businesses should not assume that eligibility, set-aside access, financing access, or contracting results will automatically change.

The public comment deadline is September 21, 2026.

For companies that sell to the Federal Government: or plan to: this is the time to review your position, prepare your records, and determine whether a formal comment is appropriate.

What SBA Proposed on August 20

SBA published two companion proposals:

  1. Industry Size Standards, which would establish revised size thresholds across broad NAICS industry groupings.
  2. Revised Size Standards Methodology, which would change how SBA analyzes industry conditions and calculates those thresholds.

The industry proposal would reduce the number of size-standard categories from nearly 1,000 to 338 broader industry groupings. According to reporting by Federal News Network, the proposal would primarily move from five- and six-digit NAICS classifications toward broader four-digit industry groups, while retaining some five-digit classifications.

The proposal includes:

  • 276 standards at the four-digit industry-group level
  • 62 standards at the five-digit level
  • Approximately 86 standards changing from receipts-based to employee-based measurements
  • Continued use of receipts-based standards for many other industries
  • Higher thresholds in a large number of sectors
  • Elimination of the longstanding ceiling that limited how high a size standard could rise

These changes are intended to simplify the system and account for the scale of modern industries. They also could expand eligibility for businesses that have outgrown current small-business thresholds but remain considerably smaller than the largest firms in their markets.

Proposed SBA size-standard methodology shown as a geometric flow from industry conditions to an eligibility threshold

How the Revised Methodology Would Work

SBA’s proposed methodology would replace its current seven-factor analytical framework with a model centered on average market size.

The proposed calculation would consider three primary measures:

  • National industry size: The overall economic size of the industry.
  • Geographic market structure: The number of distinct geographic markets in which companies compete.
  • Net imports and exports: An adjustment reflecting foreign competition and international market conditions.

SBA would combine those measures to determine an average market size and then apply a function to establish the applicable size standard.

The methodology also proposes regular adjustments to receipts-based standards using both inflation and productivity growth. That could allow thresholds to rise more quickly over time than under an inflation-only approach.

This represents a major policy shift. SBA is attempting to measure the competitive environment in which businesses operate rather than relying primarily on traditional financial and employment comparisons.

That approach may benefit companies in industries where revenue has expanded dramatically, where technology has changed productivity, or where firms compete across large national and international markets. It may also create new competitive pressure within small-business programs because newly eligible companies could include businesses significantly larger than the firms traditionally associated with small-business contracting.

Examples of Potential Threshold Changes

The reported changes vary by industry. Some proposed increases are substantial.

Examples cited in coverage of the proposal include:

Industry Current Standard Proposed Standard
Computer programming and related services Approximately $34 million Approximately $531 million
Computer systems design and related services Approximately $34–37 million Approximately $531 million
Engineering services Approximately $25.5 million Approximately $252 million
Advertising, public relations, and related services Approximately $19–34.5 million Approximately $543 million
Media streaming, social networks, and other media networks Approximately $47 million Approximately $970 million
Other financial investment activities Approximately $47 million Approximately $1.011 billion

These figures describe proposed thresholds, not current law. They also do not mean every company in an affected industry will qualify automatically. A business must still apply the correct NAICS code, calculate receipts or employees under the applicable rules, satisfy ownership and affiliation requirements where relevant, maintain required registrations, and comply with the terms of a specific procurement or program.

The proposal would also convert certain industries: particularly portions of the construction sector: from receipts-based standards to employee-based standards. Proposed construction thresholds reportedly range from approximately 550 to 2,000 employees, depending on the industry grouping.

What Small Businesses Should Review Now

1. Confirm Your Primary NAICS Codes

Start with the NAICS codes that describe your actual products and services: not simply the codes that appear most favorable.

Review:

  • Your primary line of business
  • Secondary services and capabilities
  • The NAICS codes used in prior bids
  • The codes listed in SAM.gov
  • The codes used by current and prospective agency customers
  • The size standard attached to each relevant code

Broader classifications could change how your business is evaluated. A careful NAICS review should be based on the work you perform, the customers you serve, and the revenue associated with each business activity.

2. Recalculate Receipts and Employee Counts

Gather the financial and workforce information needed to evaluate your position under both current and proposed standards.

Review:

  • Average annual receipts
  • Employee counts and calculation periods
  • Affiliates and related entities
  • Acquisitions, ownership interests, and control arrangements
  • Revenue from subsidiaries or commonly controlled businesses
  • Changes in headcount or corporate structure

Do not rely on a preliminary spreadsheet or informal estimate. Size calculations can involve detailed rules, and the consequences of an incorrect representation can be serious. Consult qualified legal, accounting, or contracting counsel as appropriate.

3. Review Certifications and Program Eligibility

A change in size status does not automatically establish eligibility for every federal program.

Review your position regarding:

  • Small-business certification
  • 8(a) participation, if applicable
  • Women-owned small business status
  • Service-disabled veteran-owned small business status
  • Historically underutilized business zone status
  • State and local certifications
  • Mentor-protégé or joint-venture arrangements
  • Contract-specific representations and certifications

Each program may include requirements beyond size, including ownership, control, location, economic disadvantage, recertification, and affiliation rules.

4. Update Your SAM.gov Profile

Your SAM.gov profile should present a current and consistent picture of your company.

Check:

  • NAICS codes
  • Core competencies
  • Capability narrative
  • Points of contact
  • Socioeconomic designations
  • Past performance
  • Contract vehicles
  • Geographic service areas
  • Representations and certifications

A profile that is technically active but strategically incomplete will not create a strong market position. Use this review to make sure your business is discoverable and clearly aligned with the agencies and requirements you intend to pursue.

Small-business readiness checklist represented through seven geometric federal contracting review panels

5. Reassess Your Federal Contracting Pipeline

If the proposal moves forward, competition may increase in industries where larger firms become newly eligible as small businesses.

Review your pipeline by:

  • Agency
  • NAICS code
  • Contract size
  • Set-aside category
  • Incumbent
  • Anticipated solicitation date
  • Required capabilities
  • Teaming requirements
  • Competitive differentiator

The central question is not merely, “Will we qualify as small?” The more important question is, “Why will the government select us?”

Specialized capabilities, credible past performance, strong customer knowledge, relevant partners, contract vehicles, technical depth, and disciplined execution will become even more important if the eligible pool expands.

Strategic federal contracting pipeline moving from capability assessment to opportunity pursuit

6. Revisit Financing and Growth Plans

A revised size standard could affect how investors, lenders, acquirers, and strategic partners view your company.

Potential considerations include:

  • Whether small-business eligibility supports your growth plan
  • Whether a larger acquisition could affect affiliation analysis
  • Whether government revenue should be included in an investment case
  • Whether new contract opportunities justify additional working capital
  • Whether bonding, hiring, equipment, or proposal costs must be funded
  • Whether a partnership or teaming arrangement can accelerate market entry

The reported expansion could create opportunity for businesses that have faced a “missing middle” problem: too large for certain small-business resources, but too small to compete for capital and contracts on equal terms with major enterprises.

Still, eligibility is only one part of a successful growth strategy. Your operating model, capital plan, sales process, contract execution, and compliance structure must support the next stage.

Should Your Company Submit a Comment?

The proposals specifically request public input, and the deadline for both proposed rules is September 21, 2026.

A useful comment should be specific and evidence-based. Consider addressing:

  • Whether the proposed NAICS grouping accurately reflects your industry
  • Whether receipts or employee counts are the better measurement
  • Whether the proposed threshold reflects actual competition
  • Whether the methodology creates unintended consequences
  • Whether a transition period is needed
  • How the changes may affect subcontractors, primes, investors, or agencies
  • Whether the proposal could increase or reduce meaningful small-business competition

Businesses preparing comments should review the official notices, organize supporting data, and consult qualified counsel or other appropriate advisors. This article is for general business information and does not provide legal advice.

From Strategy to Execution

The Infinity Group serves as a Business Development Architect for companies navigating complex growth environments. We connect strategy, execution, funding, government relationships, and commercial development into one practical plan.

We can help you assess your federal-market position, review your business-development priorities, organize your contracting pipeline, strengthen your capability presentation, evaluate funding needs, and identify the relationships and resources required to move forward.

Our government practice supports organizations pursuing federal opportunities through opportunity research, procurement strategy, competitive positioning, teaming, proposal planning, and capability alignment. Our broader consulting services connect government-facing growth with funding development, business strategy, and execution support.

The question is straightforward: if a revised size standard could open access to contracts, capital, counseling, or strategic partnerships, what is the value of preparing now?

The rule may change. The timing may change. The final thresholds may change. But companies that understand their position and prepare their records will be better equipped for whatever comes next.

The Bottom Line

SBA’s August 20 proposals could represent one of the largest expansions of small-business eligibility in decades. They could simplify industry classifications, raise thresholds, create new opportunities, and reshape competition across federal contracting.

They could also introduce uncertainty, increase competition, and require businesses to reconsider how they classify, position, finance, and operate.

Review your NAICS codes. Recalculate your receipts and employees. Confirm certifications. Update SAM.gov. Rebuild your pipeline. Examine financing needs. Prepare informed comments before September 21, 2026.

The Infinity Group can help you connect the pieces: from A to Z.

STRATEGY. EXECUTION. FUNDING. GROWTH.

Contact us at connect@infinity-us.com to discuss your next steps.

Comments and replies are disabled for this article. No comments. No replies.

Sources

The Infinity Group corporate logo with the tagline Strategies + Execution = Funding and Growth